[China Glass Network] The demand for broken aluminum doors and windows in the market is increasing year by year, and the application range is gradually expanding. As we all know, we are used to opening windows every day, and the utilization of windows is very high. Then, in the face of such high door and window equipment usage, and there is no real operation before buying equipment, so here are some details about the installation and commissioning of door and window equipment. Women's Blouse,Women Blouse Summer Long Sleeve,Women's Printed Beach Blouse,Half-Sleeve Japan Style Blouse Shaoxing Lanyu Import And Export Co.,Ltd. , https://www.lanyuclothing.com
Front, power. The voltage of 380V is the normal voltage of the general door and window mechanical equipment, the frequency is 50Hz, therefore, the connection between the live line and the neutral line needs attention. The fire and neutral wires should be connected, otherwise it may cause an accident. Generally speaking, most door and window equipment manufacturers distinguish by color, the fire line is black or blue, and the zero line is red. If the fire line is reversed, just replace the two ones.
Second, the gas supply. Since the pressure of the door and window equipment is to ensure a sufficient supply of air, this can be used better, which is the basis for cylinder compression. Under normal circumstances, the air supply and air pressure of the door and window equipment are fixed parameters, that is, the air supply flow rate should reach 0.3, and the air pressure should be able to reach 8 pressures. In the case of multiple doors and windows, this requires more gas storage tanks, depending on the actual situation. If the air pressure is not reached, the accuracy of the door and window processing equipment will have some corresponding effects, and correspondingly, the processing effect will also deviate from the expected phenomenon.
Third, the equipment side. There are many types of broken aluminum door and window equipment, each type of equipment has multiple models, or a variety of equipment parts and so on. Therefore, in the installation and debugging of door and window equipment, it is necessary to coordinate the work of each area and grasp every world, so that debugging will not cause problems.